Shoulder Nut Eye Bolts

• Hot dip galvanized
• UNC Course Thread
• Comes with HDG nut

View In Catalog

Email Page

Our Quality Philosophy

Shoulder Pattern Nut Eye Bolts

Hot Galvanized, Drop Forged

SIZE	STOCK NUMBER	WORKING LOAD LIMIT (LBS.)	WEIGHT/PIECE (LBS.)
1/4” X 2”	EB250X2S	500	0.06
1/4” X 4”	EB250X4S	500	0.09
5/16” X 2-1/4”	EB312X225S	800	0.11
5/16” X 4-1/4”	EB312X425S	800	0.15
3/8” X 2-1/2”	EB375X250S	1,200	0.19
3/8” X 4-1/2”	EB375X450S	1,200	0.25
3/8” X 6”	EB375X6S	1,200	0.32
3/8” X 8”	EB375X8S	1,200	0.38
1/2 ”X 3-1/4”	EB500X325S	2,200	0.51
1/2” X 6”	EB500X6S	2,200	0.59
1/2” X 8”	EB500X8S	2,200	1
1/2” X 10”	EB500X10S	2,200	–
1/2” X 12”	EB500X12S	2,200	–
1/2” X 18”	EB500X18S	2,200	–
5/8” X 4”	EB625X4S	3,500	0.83
5/8” X 6”	EB625X6S	3,500	1.00
5/8” X 8”	EB625X8S	3,500	–
5/8” X 10”	EB625X10S	3,500	–
5/8” X 12”	EB625X12S	3,500	–
3/4” X 4-1/2”	EB750X450S	5,200	1.5
3/4” X 6”	EB750X6S	5,200	1.7
3/4” X 8”	EB750X8S	5,200	–
3/4” X 10”	EB750X10S	5,200	–
3/4” X 12”	EB750X12S	5,200	–
3/4” X 15”	EB750X15S	5,200	–
7/8” X 5”	EB875X5S	7,200	–
7/8” X 6”	EB875X6S	7,200	–
7/8” X 8”	EB875X8S	7,200	–
7/8” X 12”	EB875X12S	7,200	–
1” X 6”	EB100X6S	10,000	3.75
1” X 9”	EB100X9S	10,000	4.29
1” X 12”	EB100X12S	10,000	–

SIZE

STOCK NUMBER

WORKING LOAD LIMIT (LBS.)

WEIGHT/PIECE (LBS.)

1/4” X 2”

EB250X2S

500

0.06

1/4” X 4”

EB250X4S

500

0.09

5/16” X 2-1/4”

EB312X225S

800

0.11

5/16” X 4-1/4”

EB312X425S

800

0.15

3/8” X 2-1/2”

EB375X250S

1,200

0.19

3/8” X 4-1/2”

EB375X450S

1,200

0.25

3/8” X 6”

EB375X6S

1,200

0.32

3/8” X 8”

EB375X8S

1,200

0.38

1/2 ”X 3-1/4”

EB500X325S

2,200

0.51

1/2” X 6”

EB500X6S

2,200

0.59

1/2” X 8”

EB500X8S

2,200

1/2” X 10”

EB500X10S

2,200

–

1/2” X 12”

EB500X12S

2,200

–

1/2” X 18”

EB500X18S

2,200

–

5/8” X 4”

EB625X4S

3,500

0.83

5/8” X 6”

EB625X6S

3,500

1.00

5/8” X 8”

EB625X8S

3,500

–

5/8” X 10”

EB625X10S

3,500

–

5/8” X 12”

EB625X12S

3,500

–

3/4” X 4-1/2”

EB750X450S

5,200

1.5

3/4” X 6”

EB750X6S

5,200

1.7

3/4” X 8”

EB750X8S

5,200

–

3/4” X 10”

EB750X10S

5,200

–

3/4” X 12”

EB750X12S

5,200

–

3/4” X 15”

EB750X15S

5,200

–

7/8” X 5”

EB875X5S

7,200

–

7/8” X 6”

EB875X6S

7,200

–

7/8” X 8”

EB875X8S

7,200

–

7/8” X 12”

EB875X12S

7,200

–

1” X 6”

EB100X6S

10,000

3.75

1” X 9”

EB100X9S

10,000

4.29

1” X 12”

EB100X12S

10,000

–

Note: Ultimate Load is 5 times the working load limit. Working load limit applies straight line pull only. Angle pulls can only be used with shoulder eye bolts and the working load limit is reduced: 45 degrees pull – 30% of WLL; 90 degrees pull – 25% of WLL.

Safety Information

DIRECTION OF PULL (FROM IN-LINE)	ADJUSTED WORKING LOAD
45 degrees	30% of rated working load
90 degrees	25% of rated working load

DIRECTION OF PULL (FROM IN-LINE)

ADJUSTED WORKING LOAD

45 degrees

30% of rated working load

90 degrees

25% of rated working load

Warning: The full ratings of machinery eye bolts can only be achieved by pulling directly in line with the threads. For angled lifts, we recommend swivel hoist rings.