X100® Weld-on Lifting Points

X100® Weld-on Lifting Points

  • Use weld-on pivoting link only with ferrous metal (steel)
  • Loads may disengage from link if proper welding, assembly, and lifting procedures are not used
  • Spring loaded pivoting link for easy rigging
  • Always inspect weld-on lifting point for damage in the weld or the pivoting link. Evidence of wear, cracks, elongation, etc., is grounds for removal from service
  • Each lifting point packed with instructions, warnings, and cautions
  • Ultimate load is 4 times the working load limit
  • Do not side load
  • Suitable for overhead lifting if welded by a certified welder*
  • * Welding is to be performed by a qualified welder using a qualified procedure in accordance with American Welding Society.